Shortcodes

All of the of the shortcodes listed below can be mix and matched. If you wanted groats for the currency with the label ‘Give me:’ for totals label just use [qis currency=groats outputtotallabel=Give me:]

[qis] Standard slider (uses the default values)
[qis currency=$] The currency symbol
[qis primary=] The initial interest rate
[qis secondary=] The alternate interest rate
[qis loanmin=1000] Sets the lower limit on the amount slider
[qis loanmax=2000] Sets the upper limit on the amount slider
[qis loanstep=50] Sets the step value on the amount slider
[qis loaninitial=1500] Sets the starting value on the amount slider
[qis periodslider=on] Display the term slider
[qis period=days] The term type: days, weeks, months or years
[qis periodmin=7] Sets the lower limit on the term slider
[qis periodmax=56] Sets the upper limit on the term slider
[qis periodstep=7] Sets the step period on the term slider
[qis periodinitial=28] Sets the initial period on the term slider
[qis trigger=56] The term value where the interest switches from the primary to secondary rate
[qis multiplier=12] Sets the ‘divider’ for a different output to the period term. See the plugin settings page for more information.
[qis markers=on] Show step markers on the sliders
[qis outputlimits=on] Show the slider limits
[qis usebubble=on] Show the slider outputs as a bubble
[qis processing=30%/$50] Set processing at 30% or $50
[qis outputrepayments=on] Show the amount to pay each period
[qis repaymentlabel= "Your repayments will be {amount} every 7 days"] Message for the amount to pay
[qis outputinterest=on] Show the interest to pay
[qis outputinterestlabel= "Interest is: {interest}"] Interest to pay message
[qis outputtotal=on] Show the total to pay
[qis outputtotallabel= "Total is: {total}"] Total to pay message
[qis textinputs=slider/text/both] Allow manual inputs to the amount and term

Add your comment

  1. Herbert said:

    Merry Christmas for you good work .

    thanks for the suggestion I wanted to us the period of 12months and repayment to be monthly.
    I use the divider it was not calculating the right monthly repayment plan.
    all I would like to express is
    The total money borrowed and the monthly repayment to be in a single line. just like : http://www.zedvance.com.
    I love your job. I hope it will bring good wealth to you regarding the upgrade.
    Thanks once again .Merry Christmas

    • Graham said:

      I need to see the website so I can see the calculations. But I can add a shortcode so you can add the total amount to the repayment message I will email you a copy of the update once it’s done.

  2. Gary said:

    How to display the output amount with the decimal. For exampe: you pay $85.45 instead of just $85.

    • Graham said:

      I thought I had fixed this in the last update. I will send you the version I have for you to test.

  3. Banks said:

    Please can you also send the updated version to segebanks@yahoo.co.uk

    This is a GREAT PLUGIN

  4. Alex said:

    Hi there, great plugin! is there any way to add markers on the slider showing the step amount values? Thanks in advance

    • Graham said:

      That shouldn’t be too difficult. Let me have a play and see what happens. Are you using the pro version?

      • Alex said:

        Thanks!! hmm…to be absolutely honest with you I didnt even know there is a pro version. Just found your plugin via search and here I am 🙂

        • Graham said:

          I’ve just sent you an email with a link to download the update for testing

      • Alex said:

        I would be happy to get the pro version if i knew where to get it. Please let me know if you managed to find a solution to adding the markers, I would be happy to pay for the custom adjustment. Big thanks in advance

  5. Azeem said:

    This is a great plugin. But I just encountered a slight problem. I updated the plugin as it asked me to do so and am using WP 4.8. After updating the plugin the plugin is not showing any values when you move the pointers on the bars.

    I am using;
    Your monthly repayment is: [amount] and
    Total you will Pay: [total]

    It is not displaying any values… Please help!

    • Graham said:

      Try refreshing the page Azeem. If that doesn’t work, send me a link to the page to I can take a look Also try using [repayment] insteasd of [amount].

  6. Johan said:

    Is there a shortcode to set the divider?
    I have 2 sliders:
    1. http://lgmicro.webtestsite.co.za/ which calculates correctly now.
    2. http://lgmicro.webtestsite.co.za/3-month-flexi-loan/ which does not because it uses the global divider setting. I need to get it to add a $15 charge to every month instead of showing the daily charges)

    • Graham said:

      Not sure how to fix the processing charge. You can use the new ‘processing’ shortcode with lets you set the fixed amount or percentage. Maybe you can use this to do the calculations.

      I might be able to to something that calculates the processing fee based on the repayment period but it will be a while as I’m a bit busy at the moment.

  7. Johan said:

    Hi, Don’t need to change the processing fee or anything, I just need to be able to set the divider with the shortcode instead of globally.

    • Graham said:

      Johan,
      [qis multiplier=12] should fix it for you. I’ve added this to the shortcode page

  8. Johan said:

    multiplier=12 and primary= do not seem to have any change or effect. Only the global rules are applied.

  9. Johan said:

    The primary= shortcode does not appear to have any effect. I have tried variations like primary=5, primary=”5″, primary=’5′, primary=5%, primary=”5%” etc. etc. nothing works.

    The multiplier= does appear to be working now.

    Here is an example of the calculation I am trying to achieve but I just cant get it to work using your shortcodes only, and not the global settings.
    http://lgmicro.webtestsite.co.za/3-month-flexi-loan
    Month 1 – Borrow $200 @ 0.5% x 30 days = a $30 Charge. Total to Pay Back $230
    Month 2 – Borrow $200 @ 0.5% x 60 days = a $60 Charge. Total to Pay Back $260
    Month 3 – Borrow $200 @ 0.5% x 90 days = a $90 Charge. Total to Pay Back $290 ($96.67 per month x 3 months)

  10. Matt said:

    Love it! Just bought the Pro Version. I would like to display multiple term options below the Result :

    Payments = $234 / month
    other options:
    2 years = x / month
    3 years = x / month
    4 years = x / month
    5 years = x / month

    (and show these results in the email autoresponder too)
    Is it possible?

    • Graham said:

      Hi Matt,
      Glad you like the plugin

      Everything is possible but to calculate and display the results you want needs a whole chunk of new code. What I usually do is build bespoke versions for clients with the exact inputs and output they want. This sort of thing: http://harold.loanpaymentplugin.com/

  11. first nationdrives said:

    hello Just upgraded your plugin
    the closest thing I found to what Im trying to accomplish now as this

    im also cant seem to be able to put the form on my site as a shortcode .. I get errors

    • Graham said:

      Hi,
      I just filled in the form and it works for me. It didn’t scroll down to the thank you message as it should but I can fix that bug

  12. Emory Peterson said:

    I need a shortcode to add the amount being borrowed (whatever the slider is on), IE if the slider is at 10,000, something like [amount borrowed] would display 10,000 etc.

    I just purchased the premium version and it would certainly help.

    • Graham said:

      Hi Emory,

      Do you mean a shortcode in the output message? If so this should be possible. I’ll have a play later for you.

  13. afiq said:

    hi.. is there any function to add slider for the interest rate

  14. Afiq said:

    can u develop 1 for me? and how much will u charged?

    • Graham said:

      Hi Afiq,
      It all depends on what you want. I’ve built versions for $100 all the way up to $1200

  15. Mario said:

    Hello, i purchase your plugin. But how can I see the monthly payments.
    Example:
    I would like 1000$ for 1 year, total 1040$. And then I would like see the monthly payments with 86,66$.

    • Graham said:

      Hi Mario.
      Use the ‘Repayment Divider’ option. If you enter ’12’ in the box it will divide the total into monthly payments

  16. Mario said:

    Awesome, THANK YOU!!! 🙂

  17. Leo said:

    Hi! I need tho show some information in the Repayment Terms, something like this:
    “You get [shortcode to show the total amount asked] and you pay [shortcode for total period asked, like 12 months] of [shortcode for the monthly payment]
    “You get [$10000] and you pay [12 months] of [$ 1000]”
    Am I clear?
    Thanks!

    • Graham said:

      Hi Leo,
      I’ve done part of your request for someone. They just paid for me to add an amount shortcode. Are you using the pro version?

Web Statistics